Note* Click inside magnifer to see large image
- Description
- Specifications
- Reviews
- Professional View
- Similar Products
- Sealers to Use
- Tools to Use
- Maintenance After
- Stains
- Screen / Abrasive
- Wood Putty
DuraSeal Water Based Poly
DuraSeal Water Based Poly is a one-component specifically for
the demands of commercial and high traffic residential hardwood
floors.
DuraSeal Water Based Poly is a professional, durable protective
finish specifically formulated for hardwood floors. This DuraSeal Water Based
Poly gives long-lasting protection and beauty to wood floors in a super
fast-drying, easy to apply formula that levels to a smooth, even
sheen.
DuraSeal Water Based Poly provides the superior durability and warm
richness of traditional polyurethane. But because it's water-based, it has
little odor, dries quickly and cleans up with warm water.
Gloss 027426806009
Semi-Gloss 027426806054
Matte 027426806153
806000000/ Gloss/ 027426806009
806050000/ Semi-Gloss/ 027426806054
806150000/ Matte/ 027426806153
New Installations and Newly Sanded Floors: 3-4 coats DuraSeal Water Based Polyurethane Floor Finish.
Recoating: 1-2 coats DuraSeal Water Based Polyurethane Floor Finish
Note: Tannin pull and/or final color results may vary depending on wood species and consistency of the application.
Duraseal Waterbased Finish MSDS – Gloss
Duraseal Waterbased Finish MSDS - Semi-Gloss
- Residential applications
- Top Coat
- Ideal for domestic or exotic species
Technical Data
| Bottle Size: | 1 Gal. (3.78L) |
| Sheens: | Floor Satin, Floor Semi-Gloss, Floor Gloss |
| Application Tool: | Lambswool or synthetic pad applicator, or a natural bristle brush |
| Location: | Interior wood floors |
| Recoat: | At least 2 hours |
| Clean Up: | Water |
| Coverage: | 500 - 700 square feet per gallon |
| Coats: | 3 |
| Recommended Uses: | Hardwood floors |
PRODUCT DESCRIPTION:
DURA SEAL WATER BASED is a one-component, 100% Urethane wood floor finish formulated for all traffic areas. It provides the performance and durability of two-component finishes while eliminating the need for a separate cross-linker. It is available in Gloss, Semi-Gloss and Satin.
NEW FLOORS:
Natural Floors:
Sand according to NOFMA or NWFA recommendations. Finish sanding with 120 or 150 grit screen. Do not use steel wool. Vacuum very thoroughly, then tack with a very lightly water dampened cloth to remove all dust.
Stained Floors:
Sand according to NOFMA or NWFA recommendations. Finish sanding with 100 grit screen (80 grit if white stain is used). Do not use steel wool. Apply stain following manufacturer's application and dry time instructions, spot test for compatibility. Make sure stain is thoroughly cured.
NOTE: If high solids stain is used, before topcoating, buff cured stain with a green synthetic pad, then tack with a water dampened cloth for best leveling and adhesion.
PREVIOUSLY FINISHED FLOORS:
NOTE: This product is not recommended for floors that have been previously finished with wax, shellac, lacquer, or stains containing wax or stearates.
SAND AND REFINISH:
Sand floors according to NOFMA or NWFA recommendations to completely remove old finish. Proceed as above under NEW FLOORS.
SCREEN AND RECOAT:
Clean floor to remove all oil, grease, and dirt, then screen lightly with a 120 grit screen. Vacuum very thoroughly; then tack with a water dampened cloth to remove all dust. Spot test for compatibility of finish before proceeding.
FINISH APPLICATION:
Make sure material is at room temperature. Invert container several times before and occasionally during use. A synthetic bar applicator is recommended for even application of product, although a synthetic brush or lambswool applicator may also be used. Do not use the same applicator that was used for the sealer. Best results are obtained at ambient temperatures between 50°F and 90°F and at humidities below 80%. If applying to white oak, two coats of DuraSeal Super Base Sealer is recommended.
- Apply sealer per label directions.
- Pour a 4-6" wide line of DURA SEAL WATER BASED Finish along the starting wall. Go with the direction oF the floor or grain.
- Pull the finish with a clean, moistened applicator toward the other wall with an angled, squeegee motion. As you approach the wall, turn the applicator and pad out excess material parallel to the wet edge. Feather all turns, stopping and starting points.
- Allow finish to dry 2-3 hours before applying next coat.
- Before applying second coat, buff with a medium grit pad to achieve smoother final finish. Note: Buffing is not required for intercoat adhesion unless the previous coat has cured 24 hrs or more
- Apply a second coat in the same manner as the first.
- If floor was not stained apply a third coat. Before applying, clean entire floor with a dust mop moistened with Dura SeaI Hardwood Floor Cleaner.
SCREEN AND RECOAT:
- Apply initial coat and allow to dry 2-3 hours (See application procedure #2 above).
- If desired, buff with a medium grit pad for a smoother final finish. Vacuum and tack thoroughly.
- Apply the final coat in the same manner as the first.
Current Reviews: 1
by Andre Meneguini
This is a durable, fast drying finish that I use on furniture that will take some abuse, like my son\'s desk. Since this product can no longer be sold in the state where I live, I tried another well known, similar product with bad results (extended drying time between coats, bubbles and an uneven finish). I now depend on FlooringSupplyStore to deliver to my door. My only complaint is that the last shipment arrived with all cans dented, but still useable...
Similar products in case you want to buy similar or just want to know
Sealers what can be used with.
Tools to be used with this product.
Products for maintenance after applied
Stain to be used with. It is recommended by manufactures or our customers. Please read direction of manufacturer to avoid trouble.
Screen to be used with. It is recommended by manufactures or our customers. Please read direction of manufacturer to avoid trouble.
Wood Fillers/Putty what can be used with.
| Currently viewing: |
-1181.jpg?osCsid=o9t3815vg2g7c2te6oksuqhp23 "Bona Traffic Waterborne Wood Floor Finish One Gallon")
