DuraSeal Quick Coat Penetrating Stain One Quart

PRODUCT PROPERTIES:

• 23 Colors to choose from
  
• Application tool: brush, cloth or foam applicator
• Location: interior wood surfaces
• Dry time: 2-3 hours
• Cleanup: mineral spirits
• Coverage: 500-600 sq. ft. per gallon
• Coats: normally 2, but additional coats may be applied for richer color when used as a finish. 1 or 2 coats when used as a stain.
• Recommended uses: furniture, woodwork, doors, floors, cabinets, accessories.
  
  * NOTE: Drying time will be increased by high humidity, low temperature, lack of air movement or incomplete removal of excess stain.

Surface Preparation:
1. Properly prepare surface according to NOFMA or NWFA approved methods.
2. Use a No. 100 grit screen [80 grit for 201 White] for the final sanding cut.
3. Remove all dust with a broom and/or vacuum and tack surface with a clean towel moistened with mineral spirits.

Application:
1. Stir or shake material thoroughly before and occasionally during use. Apply a test sample on a small inconspicuous area before proceeding with entire job. If desired, DURA SEAL Penetrating Finish #210 Neutral can be used to lighten any standard Penetrating Finish color.
2. Apply the first coat of DURA SEAL Penetrating Finish liberally with a brush, lambs wool applicator or cloth at a coverage rate of approximately 500 square feet per gallon.
3. Allow to penetrate for 5 - 8 minutes then remove excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time.
4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat [step 3 above].
NOTE: A second coat of DURA SEAL Penetrating Finish is not recommended with 350 VO.C. compliant material.
5. Allow the final coat to dry at least 8 hours [for best results overnight] and apply a finish coat of your choice.
NOTE: For heavy traffic commercial applications, it is recommended that DURA SEALâ„¢ Penetrating Finish be used without a finish coat, and periodically maintained with DURA SEAL Renovator Cleaner and Reconditioner.

PRECAUTION: Do not use steel wool when using DURA SEAL Penetrating Finish #201 White.

IMPORTANT: Immediately after use, place rags, steel wool and other waste in a sealed, water filled metal container. See cautionary statement.

CAUTION:
COMBUSTIBLE MIXTURE N.Y.F.D. C. OF A. NO.1187

KEEP OUT OF REACH OF CHILDREN.

Regularly remove dust and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintain floors sealed only with DURA SEAL Penetrating Finish with DURA SEAL Renovator Cleaner and Reconditioner.

dura seal quick dry color chart