
Note* Click inside magnifer to see large image
- Description
- Specifications
- Professional View
- Similar Products
- Sealers to Use
- Tools to Use
- Maintenance After
- Screen / Abrasive
- Wood Putty
A superior quality, high gloss polyurethane finish designed specifically for gymnasium floors. The DURA SEAL GYMTHANE Sealer and Finish System resists rubber marks and scuffing and is easily maintained.
Gloss
Semi-Gloss
Anti-Slip
853210000/ Gloss/ 027426653214
---------------------
---------------------
New Installations and Newly Sanded Floors: 3-4 coats Duraseal Gymthane Water Base Polyurethane Floor Finish.
Recoating: 1-2 coats Duraseal Gymthane Water Based Polyurethane Floor Finish
Note: Tannin pull and/or final color results may vary depending on wood species and consistency of the application.
- gymnasium floors applications
- Top Coat
- Ideal used after Gymthane Sealer
Technical Data
| Bottle Size: | 5 Gal. (18.9L) |
| Sheens: | Gloss |
| Application Tool: | Lambswool or synthetic pad applicator, or a natural bristle brush |
| Location: | Interior wood floors |
| Recoat: | At least 2 hours |
| Clean Up: | Application tools should be cleaned with warm water immediately after use. |
| Coverage: | 500 square feet per gallon |
| Coats: | 3 |
| Recommended Uses: | Hardwood floors |
| Dry Time & Cure | 1) Recoat time: 2-3 hours between coats 2) Light foot traffic is acceptable after 24 hours 3) Allow one week before exposing finish to rugs, cleaners, spills or heavy traffic |
| Maintenance | Use walk-off mats at all entrance doorways to keep dirt and grit to a minimum. Sweep or vacuum daily and damp wipe as needed with Dura Seal Hardwood Floor Cleaner. |
| Storage | Store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. If frozen, slowly warm to room temperature and mix thoroughly before using. |
| Pot Life | THE FINISH/HARDENER MIX MUST BE USED WITHIN 4 HOURS AFTER IT IS MIXED. Product properties are diminished after 4 hours. The finish and hardener can only be mixed one time. |
| Resin Type | Urethane/Acrylic |
| Density (LBS/GAL) | 8.75 lbs/gal |
| % Solids | 34.5 |
| Viscosity | 65 centipoise |
| pH | 7.8 (typical) |
| VOC (g/I) | 275 grams/liter |
| Flash Point | 103°F |
PRODUCT DESCRIPTION:
A superior quality, high gloss polyurethane finish designed specifically for gymnasium floors. The DURA SEAL~ GYMTHANE Sealer and Finish System resists rubber marks and scuffing, is easily maintained and is certified by the Maple Flooring Manufacturers Association.
DIRECTIONS:
Preparation:
- Properly prepare surface according to NOFMA OR NWFA approved methods. Screen using No.100 disc for final cut
- Remove all dust with a broom and/or vacuum and tack surface with a clean cloth moistened with mineral spirits.
Sealer Application:
- Apply one coat of GYMTHANE Sealer with a lambs wool applicator at a coverage rate of 500 square feet per gallon.
- Allow to dry at least 8 hours.
- Screen using No.100 disc.
- Tack with a clean cloth moistened with mineral spirits to remove all dust.
Game Line Application:
- Apply accordingly to label directions.
- Allow to dry thoroughly.
- Screen surface with a No.120 screen or finer.
- Tack surface with a cloth dampened with mineral spirits to remove all dust.
Finish Application:
- Apply first coat of GYMTHANE Finish 450 with a lambswool applicator at a coverage rate of 500 square feet per gallon.
- Allow to dry at least 8 hours.
- Screen with No.100 disc screen.
- Tack with a clean cloth moistened with mineral spirits to remove all dust.
- Apply a second coat of GYMTHANE Finish 450 in the same manner as the first.
Similar products in case you want to buy similar or just want to know
Sealers what can be used with.
Tools to be used with this product.
Products for maintenance after applied
Screen to be used with. It is recommended by manufactures or our customers. Please read direction of manufacturer to avoid trouble.
Wood Fillers/Putty what can be used with.
| Currently viewing: |









-1181.jpg?osCsid=lo3o5cj70j12hhramubaalh6r0)



