Bona Traffic Anti-Slip Satin Waterborne Wood Floor Finish One Gallon (Part A)

Note* Click inside magnifer to see large image

Description
Specifications
Professional View
Similar Products
Sealers to Use
Tools to Use
Maintenance After
Stains
Screen / Abrasive
Wood Putty

Product details: Bona Traffic Anti-Slip Satin Waterborne Wood Floor Finish One Gallon (Part A)

Bona Traffic Anti-Slip is a 2-component waterborne finish offering exceptional durability and protection for hardwood floors. It has all the features of Bona Traffic but with the additional benefit of being formulated to meet the highest standards for slip resistance.

With its higher coefficient of friction, Bona Traffic Anti-Slip is an ideal choice for stairs, nurseries, kitchens and similar locations. GREENGUARD certified for indoor air quality.

Category

Waterbased

UPC #

Satin
Gloss
Semi-Gloss
Anti-Slip

Model/ Shade/ UPC

WT153918001/ Anti-Slip Satin/
---------------------
---------------------
---------------------

Component Type

Two Component

Coverage per Gallon

350-400 SF

Odor

Non-offending, slight ammonia

Unit of Measure

Gallon

Cure Time

7-10 Days

Solids

34 %

Lot Size

Sheen

Anti-Slip Satin

Special Handling

None

VOC(g/liter)

210

Dry Time

2-3 Hours

Color

Clear

Manufacturer

Bona

Calculator
Extras
MSDS
Recommended Use
Technical data
Directions
Maintenance

Meets the ADA recommendation for accesible routes and ramps according to ASTM 2047
Meets the German Industrial Norm for slip resistance DIN 51 130 with a rating of R10
Clear and colorless, which highlights the true color of stained or natural wood floors. Will not change color over time, allowing for easy touch-up
GREENGUARD certified for indoor air quality
No sealer needed over a stained floor
Exceptional build with excellent flow and leveling
Fast drying- Approximately 2-3 hours
Nonflammable with a non-offending odor
Water clean-up

Bona Traffic Anti-Slip Spec

Bona Traffic Anti-Slip Satin MSDS

Bona Waterborne Finishes Brochure

Bona GREENGUARD Brochure

Bona Traffic Anti-Slip Satin Waterborne Wood Floor Finish One Gallon (Part A) is recommended to use at Commercial and residential use including shopping malls, restaurants, offices, retail stores, theater stages, hospitals, schools, and nursing homes, where slip resistance is required.

Technical Data

Physical Characteristics:
Ingredients	Water, Polymer(s), and amorphous silica
Color	Milky white (wet)
pH	7.5 - 7.9
Solids	34% (with hardener)
Density	8.70 lbs./gallon (1.04 S.G.)
US Regulatory VOC Compliant	210 g/L (with hardener)
Coefficient of Friction	= 0.8
Gloss Level (60°)	Approximately 25
Odor	Very slight non-offensive odor
Stability	1 year shelf life in unopened container
Packaging	1-gallon plastic bottle
Application Characteristics:
Clarity	Clear and colorless when dry
Leveling	Excellent
Defoaming	Excellent
Drying Time	2-3 hours
Pot Life	THE FINISH/HARDENER MIXTURE MUST BE USED WITHIN 4 HOURS AFTER IT IS MIXED. Product properties are diminished after 4 hours. The finish and hardener can only be mixed one time.
Coverage	350-400 square feet per gallon
Percent Cured After 24 Hours	75%, 72 hours – 90%
Maximum Cure	100% after 1 week

BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEETS.
FOR TECHNICAL ADVICE: Call Bona US at 800/872-5515

COMPATIBILITY: Bona Traffic Anti-Slip will adhere to most stains and finishes after proper preparation and dry times. Stain, sealer and finish results may vary widely depending on the wood species, especially on oily and resinous Exotics.

ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY, PPEARANCE AND DESIRED RESULTS.

SANDING AND PREPARATION OF NEW FLOORS:

Sand and prepare floor using accepted industry association methods.
For a stained floor, make your final cut with 80-100 grit paper and screen to 80-100 grit. For an unstained floor, make your final cut with 80-100 grit paper and disc/screen to 120-150 grit. This burnishing will reduce the amount of grain raise.
Use a Tampico Brush on a buffer and vacuum thoroughly. 4. Tack with a dry Bona Microfiber Mop or cloth. 5. Apply finish system.

THE BONA TRAFFIC ANTI-SLIP FINISH SYSTEM: Apply a Bona sealer or Bona stain and 2 coats of Bona Traffic Anti-Slip. Follow label directions. Adding a third coat of Bona Traffic Anti-Slip is recommended in heavy-traffic commercial and residential areas. Visit www.bona.com for additional product information.

RECOMMENDED APPLICATORS: Bona Floor Coater, Bona Roller, Bona Cut-In pad.

NOTE: Use a clean applicator for sealer and a separate clean applicator for finish.

MIXING INSTRUCTIONS: SHAKE WELL BEFORE USING. DO NOT THIN. DO NOT ADD WATER.

Shake Bona Traffic Anti-Slip finish (Part A) well for 30 seconds.
Add Bona Traffic Hardener (Part B) to finish (Part A). One 12.8 oz. bottle of hardener will activate one gallon of finish. To mix finish amounts of less than one gallon, use a 1:10 ratio.
Immediately shake mixture vigorously for 30-45 seconds.
Insert supplied filter into bottle only after adding hardener.
Let sit for 5-10 minutes before applying.

BONA TRAFFIC ANTI-SLIP CANNOT BE REHARDENED.

FINISHING:

Pour a 6" wide line of finish along the starting wall. Go with the grain of the wood.
Using a pre-dampened applicator, draw the applicator forward with the grain of the wood, moving the finish toward the opposite wall. To maintain a wet edge at all times, hold the applicator at a snowplow angle.
At the end of each run, turn the applicator towards you and pad out the applicator parallel to the wet edge.
Feather out all turns. Do not push too hard or too fast to avoid drips flying off the applicator.
BE SURE YOU ARE USING THE RECOMMENDED COVERAGE OF 350-400 SQ. FT. PER GALLON. DO NOT SPREAD TOO THIN.
Allow the first coat to dry 2-3 hours. High humidity and/or low temperature conditions will extend the dry time (recommended conditions of 65-80°F/40-60% relative humidity).
For smoothest results, abrade with a Bona Conditioning Pad before applying final coat. Always vacuum and tack thoroughly with a slightly water dampened Bona Microfiber Mop or cloth after abrading. Allow final coat to dry at least 24 hours before use.

CAUTION! Do not recap finish/hardener mixture after 4 hours to avoid pressure build-up. Dispose of any remaining product in accordance with local, state and federal regulations. Decontaminate empty hardener (Part B) bottle prior to disposal by adding water to the one-quart line. Recap. Shake vigorously. Dispose of.

POT LIFE: THE FINISH/HARDENER MIXTURE MUST BE USED WITHIN 4 HOURS AFTER IT IS MIXED. Product properties are diminished after 4 hours. The finish and hardener can be mixed only one time.

INTERCOAT ABRASION: It is not necessary to abrade between Bona waterborne sealer and finish coats unless more than 48 hours has passed since the previous coat was applied. For smoothest results, abrade between all coats as necessary. When using solvent-based sealers, ALWAYS abrade before finish coats. Always vacuum and tack thoroughly with a slightly water-dampened Bona Microfiber Mop or cloth after abrading.

RECOATING: Be sure floor is free from wax, polish and oily residues. Follow the Bona Prep system, applying 1-2 coats of Bona Traffic Anti-Slip finish. Delamination can occur if the Bona Prep process is not followed and the floor has not been tested for compatibility.

Maintenance

CURING: The curing process takes approximately 7 days, (80% cured after 1 day, 90% after 3 days). Do not replace area rugs until the floor has fully cured. The floor may be walked on after 24 hours, but remains susceptible to scuffing or marring until completely cured. Furniture may be placed onto floor after 72 hours (90% cured). Do not drag or slide furniture. Use only a dry Bona Microfiber Mop or cloth for cleaning during the first week.

CLEAN-UP: Application tools should be cleaned with water and stored in an airtight container.

FLOOR CARE: Put walk-off mats at all entrance doorways to minimize dirt and grit. Sweep or vacuum daily and damp-wipe as needed with Bona Professional Series Hardwood Floor Cleaner. Use felt pads under furniture legs and appliances.

STORAGE: Nonflammable - Bona Traffic Anti-Slip and Hardener should be stored in a climate controlled environment. KEEP FROM FREEZING. Do not store above 100° F (38° C).