Note* Click inside magnifer to see large image
- Description
- Specifications
- Reviews
- Professional View
- Similar Products
- Sealers to Use
- Tools to Use
- Maintenance After
- Stains
- Screen / Abrasive
- Wood Putty
Unsurpassed flow and leveling, defoaming, and numberous application options make Bona Novia the easiest to use waterborne finish on the market. When Bona Novia is used with Bona AmberSeal , it is a budget sensitive, dependable alternative to any oil-based system.
Gloss/ 737025001230
Semi-Gloss/ 737025001223
---------------------
WT230018002/ Gloss/ 737025001230
WT230318002/ Semi-Gloss/ 737025001223
---------------------
- Developed especially to replace oil-based finishes
- Clear and colorless, which highlights the true color of stained or natural wood floors. Will not change color over time, allowing for easy touch-up
- Forgiving/easy application. Can be applied with most applicators using a variety of techniques
- One-component. No limited pot life or wasted finish
- Exceptional build and clarity
- Excellent flow and leveling
- GREENGUARD certified for indoor air quality
- Fast drying Approximately 2-3 hours
- Non-flammable and virtually odorless
- Water clean-up
- Available in Gloss, Semi-gloss, or Satin
Anywhere an oil-based finish would be used
Technical Data
Physical Characteristics: |
|
| Ingredients: | Water, polymeric resins, dipropylene glycol monomethyl ether, dipropylene glycol nbutyl ether |
| Color | Milky white (wet) |
| pH | 7.5 – 7.9 |
| Solids | 30 – 32% |
| Density | 8.70 lbs./gallon (1.04 S.G.) |
| US Regulatory VOC | 220 g/L |
| Gloss Level | 85 for gloss, 45-50 for semi-gloss 25-30 for satin |
| Odor | Non-offending |
| Stability | 1 year shelf life in unopened container |
| Packaging | 1-gallon plastic bottle |
Application Characteristics: |
|
| Clarity | Clear and colorless when dry |
| Leveling | Excellent |
| Defoaming | Excellent |
| Drying Time | 2-3 hours |
| Coverage | 500-600 square feet per gallon |
| Percent Cured After 24 Hours | 70% |
| Maximum Cure | 100% after 1 week |
BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEETS.
FOR TECHNICAL ADVICE: Call Bona US at 800/872-5515
COMPATIBILITY: Bona Novia will adhere to most stains and finishes after proper preparation and dry times. Stain, sealer and finish results may vary widely depending on the wood species, especially on oily and resinous Exotics.
ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY, APPEARANCE AND DESIRED RESULTS.
SANDING AND PREPARATION OF NEW FLOORS:
- Sand and prepare floor using accepted industry association methods.
- For a stained floor, make your final cut with 80-100 grit paper and screen to 80-100 grit. For an unstained floor, make your final cut with 80-100 grit paper and disc/screen to 120-150 grit. This burnishing will reduce the amount of grain raise.
- Use a Tampico Brush on a buffer and vacuum thoroughly.
- Tack with a dry Bona Microfiber Mop or cloth to remove dust.
- Apply finish system.
THE BONA NOVIA FINISH SYSTEM: Apply a Bona sealer or Bona stain and 2 coats of Bona Novia. Follow label directions. Adding a third coat of Bona Novia is recommended in heavy-traffic commercial and residential areas. Visit www.bona.com for additional product information.
RECOMMENDED APPLICATORS: Bona Roller, Bona Floor Coater (T-bar), Bona Cut-In Pad.
NOTE: Use a clean applicator for sealer and a separate clean applicator for finish.
MIXING INSTRUCTIONS: SHAKE WELL BEFORE USING. DO NOT THIN. DO NOT ADD WATER. Insert supplied filter.
FINISHING:
- Pour a 6" wide line of Bona Naturale across the direction of the flooring, cut-in 12"- 18" away from wall.
- Saturate the roller with finish. Make sure to roll over all areas where cut-in pad was used.
- Set roller down at back side of puddle and pull the roller towards you. Then push back in the same path feathering past your start point. Do not apply pressure to the roller. Overlap your run by 25%. Rolling too fast will cause drips to fly off the roller.
- BE SURE YOU ARE USING THE RECOMMENDED COVERAGE OF 500-600 SQ. FT. PER GALLON. DO NOT SPREAD TOO THIN.
- Allow the first coat to dry 2-3 hours. High humidity and/or low temperature conditions will extend the dry time (recommended conditions of 65-80° F (18° C-27° C) 40-60% relative humidity).
- For smoothest results, abrade with a Bona Conditioning Pad before applying final coat. Always vacuum and tack thoroughly with a slightly water dampened Bona Microfiber Mop or cloth after abrading. Allow final coat to dry at least 48 hours before use.
INTERCOAT ABRASION:It is not necessary to abrade between Bona waterborne sealer and finish coats unless more than 48 hours has passed since the previous coat was applied. For smoothest results, abrade between all coats. When using solvent-based sealers, ALWAYS abrade before finish coats. Always vacuum and tack thoroughly with a slightly water-dampened Bona Microfiber Mop or cloth after abrading.
RECOATING: Be sure floor is free from wax, polish and oily residues. Follow the Bona Prep system, applying 1-2 coats of Bona Novia. If Recoating a Factory Prefinished Floor, DO NOT USE Bona Novia finish. Use Bona Naturale or Bona Traffic finishes with the Bona Prep system. Delamination can occur if the Bona Prep process is not followed; always test for compatibility.
CURING: The curing process takes approximately 7 days, (70% cured after 1 day, 90% after 3 days). Do not replace area rugs until the floor has fully cured. The floor may be walked on after 24 hours, but remains susceptible to scuffing or marring until completely cured. Furniture may be placed onto floor after 72 hours (90% cured). Do not drag or slide furniture. Use only a dry Bona Microfiber Mop or cloth for cleaning during the first week.
CLEAN-UP: Application tools should be cleaned with water and stored in an airtight container.
FLOOR CARE: Put walk-off mats at all entrance doorways to keep out excessive dirt and grit. Sweep or vacuum daily and damp-wipe as needed with Bona Hardwood Floor Cleaner. Use felt pads under furniture legs and appliances.
STORAGE: Nonflammable - Bona Novia should be stored in a climate controlled environment. KEEP FROM FREEZING. Do not store above 100° F (38° C).
Current Reviews: 1
Similar products in case you want to buy similar or just want to know
Sealers what can be used with.
Tools to be used with this product.
Products for maintenance after applied
Stain to be used with. It is recommended by manufactures or our customers. Please read direction of manufacturer to avoid trouble.
Screen to be used with. It is recommended by manufactures or our customers. Please read direction of manufacturer to avoid trouble.
Wood Fillers/Putty what can be used with.
| Currently viewing: |
Featured Products
-1181.jpg?osCsid=eco9jv2j1p6d8hfcnogcntmug6 "Bona Traffic Waterborne Wood Floor Finish One Gallon")
Your Recent History
Recently Visited Products
