Bona Drifast Quart Oil Based Wood Stain Penetrating

• 2 hour dry time
• No bleed back
• Penetrates, stains, and seals bare wood
• 800 - 1,000 sf/gal coverage rate
• All stain colors can be blended, offering an endless color palette
• Cleans up with mineral spirits
• Low odor
• Easy touch-ups (mineral spirits for thinning dark or heavy spots)

Apply only over bare wood
Prepares the surface for a topcoat of Bona waterborne or any other Bona finish

Physical Characteristics:
Ingredients – Wood tones: Oil-modified resins, mineral spirits (solvent), pigments, driers
White: Oil-modified resins, mineral spirits (solvent), Titanium Dioxide, fillers
Colors – Wood tones: Natural, Golden Oak, Nutmeg, Early American, Provincial, Special Walnut,
Rosewood, Red Mahogany, Jacobean, Ebony, Medium Brown, Antique Brown, Puritan pine,
Cherry.
Pastel: White (Not recommended on white oak due to excessive color variation).
Odor – Mild solvent odor
Stability – One year shelf life in unopened container
Solids – 35-40%
Density – Wood tones: 7.2-7.5 lbs/gallon (0.86-0.90 s.g.), White: 8.7-9.0 lbs/gallon (1.04-1.8 s.g.)
VOC – Does not exceed 550 grams per liter (4.6 lbs. per gallon VOC)
Viscosity – (#4 Ford cup @ 25ºC) 13-18 seconds
Clarity – Semi-transparent (dry)
Application Characteristics:
Drying Time – 2 hours to coat, 6 hours minimum for White, under ideal conditions (65-80º F, 40-
60% relative humidity).
Coverage – 800-1,000 square feet per gallon
Application Tools – Clean cloths, brush, cut-in pad
Packaging - 1-quart cans · 1-gallon cans

NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents
with permanent brain and nervous system damage. Intentional misuse by deliberately
concentrating and inhaling the contents may be harmful or fatal.
FOR TECHNICAL ADVICE: Call Bona US at 800-872-5515
COMPATIBILITY: Bona does not recommend using white stain on white oak due to excessive
color variation. Stain, sealer and finish results may vary widely depending on the wood species,
especially on oily and resinous Exotics. ALWAYS PREPARE A SAMPLE OR TEST AREA TO
DETERMINE COMPATIBILITY, APPEARANCE AND DESIRED RESULTS.
SANDING AND PREPARATION OF NEW FLOORS: 1. Sand and prepare floor using accepted
industry association methods. 2. Make your final cut with 80-100 grit paper and screen to 80-100
grit. 3. Use a Tampico Brush on a buffer and vacuum thoroughly. 4. Tack with a dry BonaÂ
Microfiber Mop or cloth to remove dust. 5. Apply stain system.
THE BONAÂ DRIFASTÂ STAIN SYSTEM: Bona Drifast Stain is a redesolving stain designed to
penetrate, stain and seal bare wood. Bona Drifast Stain is designed to work with all Bona finishes.

CLEAN-UP: Clean application tools and equipment with mineral spirits.
STABILITY: One year shelf life in unopened container.
STORAGE AND DISPOSAL: Store at room temperature. Keep container closed when not in use.
Do not store above 100° F (38° C). Do not transfer contents to other containers for storage and
disposal. In case of spillage, absorb with inert material. Dispose of contaminated absorbent,
container and unused contents in accordance with local, state and federal regulations.
INGREDIENTS: Wood tones: oil-modified resins, mineral spirits (solvent), pigments, driers - White:
Oil-modified resins, mineral spirits (solvent), Titanium Dioxide, fillers. OSHA Class II (Combustible
Liquid). Flash point: 103° F (39° C). DANGER: RAGS, STEEL WOOL OR WASTE SOAKED WITH
BONA DRIFAST STAIN MAY SPONTANEOUSLY CATCH FIRE IF IMPROPERLY DISCARDED.
IMMEDIATELY AFTER EACH USE, PLACE RAGS, STEEL WOOL OR WASTE IN A SEALED,
WATER-FILLED, METAL CONTAINER.