Bona CourtLines Sport Floor Paint - Quart

• Bona Courtlines Sport Floor Paint
• Spec Bona CourtLines Sport Floor Paint (all colors except white) MSDS
• Bona CourtLines Sport Floor Paint (white) MSDS
• Bona CourtLines Color Chart

• Basketball courts
  
• Volleyball courts
  
• Racquetball, squash and badminton courts
  
• Multi-purpose gym, stage, aerobic and dance floors

Physical Characteristics:

Ingredients – Alkyd resins, odourless mineral spirits, pigments, driers, titanium dioxide
Base Colors – Red, yellow, green, lt. blue, dark blue, orange, brown, black, white, gold, maroon, purple, lt. beige, gray, NC blue
Odor – Non-offending low odor
Solids – Colors: 47-51%; White: 66%
Flash Point - 100o F (TCC)
Density – Colors: 7.6-7.9 lbs./gallon; White: 11.1 lbs./gallon
US Regulatory VOC – Does not exceed 490 g/L
Stability – One year shelf life in unopened container
Packaging – 1-quart cans

Application Characteristics:

Coverage – 500-600 sq. ft. per gallon (125-150 square feet per quart) Leveling – Excellent
Drying Time – 24 hour recoat
Application Tools – Brush, roller

FOR TECHNICAL ADVICE: Call Bona US at 800-872-5515

COMPATIBILITY: Bona CourtLines Paint will adhere to most finishes and sealers after proper preparation and dry times. ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY. Bona CourtLines paints are blendable to achieve any custom color desired. Blending rather than tinting, maintains brightness and application characteristics.

THE BONA COURTLINES PAINT SYSTEM: See sealer instructions for proper sequence of sealer, gamelines and finish coats.

RECOMMENDED APPLICATORS: 1/4” nap roller, brush NOTE: Use separate, clean roller/brush for each color of paint.

GAMELINES APPLICATION: 1. Before application, thoroughly abrade entire floor following sealer/finish directions. Make sure paint is applied within 24 hours of floor being abraded. Re- abrade if necessary. 2. Tape gamelines according to MFMA specifications. 3. Stir paint thoroughly. Do not thin. 4. Apply evenly with the grain of the wood, using a brush or 1/4” nap roller. Apply a thin coat of paint at a rate of 500-600 sqft/gallon (125-150 square feet per quart). More than one coat may be needed. Apply second coat once first coat is dry to the touch (1-4 hours). 5. Allow paint to dry 24 hours before coating with finish. Additional dry time may be needed in cooler temperatures and high humidity. 6. Abrade the entire floor with Bona Conditioning Pads or a used 120 or 150 screens. 7. Sweep, vacuum and tack with water. Allow floor to dry 30 minutes prior to applying finish. Apply finish within 24 hours of abrading. Re-abrade if necessary. Note: When working with more than one container of the same color, intermix to ensure uniformity. When mixing “custom” colors, mix enough paint to cover entire job to ensure uniformity.

DANGER: RAGS, STEEL WOOL OR WASTE SOAKED WITH COURTLINES MAY SPONTANEOUSLY CATCH FIRE IF IMPROPERLY DISCARDED. IMMEDIATELY AFTER EACH USE, PLACE RAGS, STEEL WOOL OR WASTE IN A SEALED, WATER-FILLED, METAL CONTAINER.

CLEAN-UP: Clean application tools and equipment with mineral spirits.

STORAGE AND DISPOSAL: Store at room temperature. Keep container closed when not in use. Do not store above 100° F (38° C). Do not transfer contents to other containers for storage and disposal. In case of spillage, absorb with inert material. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.