Bona Bonaseal One Gallon

Note* Click inside magnifer to see large image

Description
Specifications
Professional View
Similar Products
Top Coat

Product details: Bona Bonaseal One Gallon

Bonaseal is a specially formulated waterborne sealer for use with all Bona waterborne finishes. The exceptionally clear formula highlights the natural color of the wood, minimizes grain raise and tannin bleed, provides a build layer, and prevents the finish from penetrating into the wood surface. Virtually odorless and nonflammable.

Category

Waterbased

Raise Grain

Medium

Model#, UPC#

WB200018005 / Sealer / 737025805005

Component Type

One Component

Coverage per Gallon

550-600 SF

Odor

Non-offending

Unit of Measure

Gallon

Solids

36 %

Lot Size

Sheen

Sealer

Special Handling

None

VOC(g/liter)

100

Dry Time

2-3 Hours

Color

Clear

SKU #

Manufacturer

Bona

Calculator
Extras
MSDS
Recommended Use
Technical data
Directions
Maintenance

Seals the wood, preventing the finish from penetrating
Minimizes tannin bleed, especially on white oak
Reduces tendency for sidebonding
Improves flow and leveling of finish coats
Exceptionally clear, highlighting true color of wood
VOC Compliant

Bonaseal Spec

Bona Bonaseal Spec- Canada

Bonaseal MSDS

Bona Waterborne Finishes Brochure

Bona GREENGUARD Brochure

Commercial and residential use including:

shopping malls
restaurants
offices
retail stores
theater
stages
hospitals
schools
nursing homes
and more!

Technical Data

Physical Characteristics:
Ingredients	Water, acrylic resin, dipropylene glycol monomethyl ether, defoamers.
Color	Milky white (wet)
pH	7.8
Solids	36%
Density	8.70 lbs/gallon (1.04 S.G.)
US Regulatory VOC	100 g/L
Gloss Level	N/A
Odor	Non-offending
Packaging	1-gallon plastic bottle
Application Characteristics:
Clarity	Clear when dry
Leveling	Excellent
Defoaming	Excellent
Drying Time	approximately 2-3 hours (high humidity and/or low temperature conditions will extend the drying time)
Coverage	500-600 square feet per gallon
Percent Cured After 24 Hours	N/A
Maximum Cure	100% after 1 week

BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEETS.
FOR TECHNICAL ADVICE: Call Bona US at 800/872-5515

COMPATIBILITY: Stain, sealer and finish results may vary widely depending on the wood species, especially on oily and resinous Exotics. ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY, APPEARANCE AND DESIRED RESULTS.

SANDING AND PREPARATION OF NEW FLOORS:

Sand and prepare floor using accepted industry association methods.
For a stained floor, make your final cut with 80-100 grit paper and screen to 80-100 grit. For an unstained floor, make your final cut with 80-100 grit paper and disc/screen to 120-150 grit. This burnishing will reduce the amount of grain raise.
Use a Tampico Brush on a buffer and vacuum thoroughly.
Tack with a dry Bona Microfiber Mop or cloth to remove dust.
Apply finish system.

THE BONASEAL SYSTEM: Apply 1 coat of Bonaseal and 2 coats of a Bona waterborne finish. Bonaseal is not recommended over Bona stain. Bonaseal minimizes side-bonding and grain raise, provides a build layer, and prevents the finish from penetrating into the wood surface. Visit www.bona.com for additional product information.

RECOMMENDED APPLICATORS: Bona Floor Coater (T-bar), Bona Roller, Bona Cut-In Pad.
NOTE: Use a clean applicator for sealer and a separate clean applicator for finish.

MIXING INSTRUCTIONS: SHAKE WELL BEFORE USING – DO NOT THIN. DO NOT ADD WATER. Insert supplied filter.

SEALING:

Pour a 4" wide line of sealer along the starting wall. Go with the grain of the wood.
Using a pre-dampened T-bar sleeve, draw the applicator forward with the grain of the wood, moving the sealer toward the opposite wall. To maintain a wet edge at all times, hold the applicator at a snowplow angle.
At the end of each run, turn the applicator towards you and pad out the applicator parallel to the wet edge.
Feather out all turns. Do not push too hard or too fast to avoid drips flying off the applicator.
BE SURE YOU ARE USING THE RECOMMENDED COVERAGE OF 500-600 SQ. FT. PER GALLON. DO NOT SPREAD TOO THIN.
Allow the first coat to dry 2-3 hours. High humidity and/or low temperature conditions will extend the dry time recommended conditions of 65-80° F (18°C-27°C) 40-60% relative humidity).
For smoothest results, abrade before applying finish coats. Always vacuum and tack thoroughly with a slightly water dampened Bona Microfiber Mop or cloth after abrading.

INTERCOAT ABRASION: It is not necessary to abrade Bonaseal unless more than 48 hours has passed since the previous coat was applied. However, for smoothest results, abrade Bonaseal with a Bona Conditioning Pad and 1-2 Delta sheets as needed. Always vacuum and tack thoroughly with a slightly water-dampened Bona Microfiber Mop or cloth after abrading.

CLEAN-UP: Application tools should be cleaned with water and stored in an airtight container. This product has a maximum VOC (Volatile Organic Compound) content of 100 grams per

STORAGE: Nonflammable - Bonaseal should be stored in a climate controlled environment. KEEP FROM FREEZING. Do not store above 100° F (38° C).