Note* Click inside magnifer to see large image
Absco Sealer offers the latest technology in environmentally compliant wood floor sealers. Absco Sealer is the first water-based sealer that truly duplicates an oil-based look with a water cleanup made by last n last. Absco Sealer have high solid content what will seal wood surfaces with 100% polyurethane protection, and keep floors looking beautiful.
- Recommended for both Oil and Water Top Coats
- Ambering Oil-Based Appearance
- Recoat in 1 to 2 Hours
Absco Sealer Wood Floor is excellent for sealing most interior wood surfaces including floors, doors,cabinets, and furniture.
TYPICAL PROPERTIES
| Color in Container | Amber color(dries clear) |
| Solids Content | 25+/-1% |
| Chemical Resistance | Excellent |
| VOC | VOC does not exceed 275 grams/liter |
| Flash Point | 198°F |
| Pot Life | Unlimited in unopened container |
| Dry Time | 2 hours with good conditions |
| Clean Up | Water |
| Application method | T-Bar applicator, Synthetic waterborne applicator, Nnylon brush. |
| Coverage | 550-650 sq. feet per gallon. |
Proper surface preparation is essential to achieve a high quality finish. Read the MSDS sheet and wear proper protection, which may include gloves, eye protection, and/or other protective devices.
Surface Preparation: New or Newly Sanded Floors or Wood Surfaces:
Prepare the floor according to NWFA or NOFMA accepted standard. The final pass before application of sealer should be a #100 to #150 grit screen pad or sandpaper. Remove dust completely by sweeping, vacuuming and wiping the floor or work surface with a lint free cloth lightly dampened with water. The floor or work surface and room temperature should be at least 65°F.
APPLICATION: Apply sealer using standard water based finish techniques. Applicator should be slightly damp with finish before starting. Pour sealer onto floor 4" strip along the starting wall. Apply the sealer with the grain of wood. Pull the applicator towards you holding the applicator at a slight "snowplow" angle. Remember keep a wet edge as you work. When you reach the end wall, pull the applicator in a sweeping motion, without lifting it from the floor. Feather turn, and gently touch any missed spots. Apply at recommended coverage. Screen the floor or work surface with any of the following: #100 to #150 screen disc, #180 grit sand paper, or maroon pad prior to application of first top coat. Don'tover sand between coats.
Drying Time: Absco Sealer should be dry to the touch in 1 hour. Allow minimum of 2 hours before screening and for the topcoat to be applied. Heavy finish application, high humidity or lack of airflow will extend drying times. Under oil, longer dry time maybe needed.
Clean up: Use water to clean brushes and applicators.
Similar products in case you want to buy similar or just want to know
Top coat to be used with. It is recommended by it manufacturer and advised by our customers.
Stain to be used with. It is recommended by manufactures or our customers. Please read direction of manufacturer to avoid trouble.
| Currently viewing: |
-1181.jpg?osCsid=g992k8akgdtp36ipjiq3d8gtr1 "Bona Traffic Waterborne Wood Floor Finish One Gallon")
